
By concentrating innovation in aerodynamics, the electronic controls and dynamics, as well as content that is here for the first time in a single car bundled applications, this model becomes a real technological laboratory. Not without reason, the painting reminds us of the 599XX in the Formula-1-model F2008.

Based on the Ferrari 599 GTB Fiorano, whose traditional transaxle design with the spatial separation of the propulsion elements of the 599XX aufweist, was an extreme, for use on the track of certain sports cars. The 6.0-liter V12 engine experienced significant changes to the combustion chamber and the intake and exhaust system. The modifications resulted, together with the reduction of wear at the various mechanical parts and the increase of the maximum torque at 9,000 rpm, to an increase in overall performance to 700 hp.
Particular attention was paid to reducing the weight of the many components of the propulsion group. This was achieved by optimizing the shape, such as the new drive, as well as noble materials such as carbon, when Vortopf used. When gearbox is a new switch management, which is the total time course of change at 60 milliseconds reduced.
In general, to register with a noticeable increase in performance a more difficult management of the car, resulting in a poorer controllability expresses. The electronic controls of the 599XX, however, together with the mechanics and help to maximize the potential of the car both in terms of the benefits as well as the lasting viability of use in any potential situation. The sporty driving style also facilitate the presence of a "virtual lngenieurs" in real time the efficiency of the car shows.

For the first time comes when the 599XX Ferrari Actiflow system is used, which helps with the stability of vertical loads and to improve the resistance to different dynamic conditions on the track down. This solution consists in the introduction of two blowers in the trunk, thanks to the porous material in the air diffuser on the floor and suck it from the back by two grids, which are at the height of the rear lights are ejaculate.
The guide is a lateral wings and the addition of the Formula 1 derived "Blassystem" improves the stability of vertical loads, while the application of synthetic jets, the Ferrari at the rear of the vehicle attached to the formation of vortices trailing flow control and reduces the aerodynamic resistance. So-called "Wheel Donuts" on the model of Formula 1 - umbrellas, so to speak, the brake and the rim partially disguise - to improve the aerodynamics and cooling.

From the development of powerful materials also benefits the brakes so that the brake lining as carbon is used, resulting in a reduction of the caliper, in order not to affect the performance. The new carbon-ceramic braking system from Racing-Type allows even shorter braking distances thanks to weight saving and improved efficiency.
The contact to the asphalt racing slick tires are in the format 29/67 R19 front and rear 31/71 R19 ago. The extra for the Ferrari 599XX developed Rennslicks the Italians moved on rims of the dimension 19 x 11j (front) and 19 x 12J (back) on. The tires will be a very good cornering stability, and optimize the speed side.